China Professional High Quality Grafted Poe White Granules for Increased Dispersibility complex injection molded parts

Product Description

Product Description

POE granules

  Poe is a thermoplastic elastomer that realizes in-situ polymerization of ethylene and octene with metallocene catalyst. There are 2 kinds of Poe, 1 is the polymer of ethylene and butene, and the other is the polymer of ethylene and octene; It is a flexible transparent soft plastic with small proportion (smaller proportion than PP) and light density. It is very easy to process and shape.
  It is widely used as auto parts, such as auto bumper, auto interior trim, PP modification industry, packaging materials, sporting goods, wire and cable, low smoke halogen-free wire materials, building decoration materials, stationery and daily necessities. It is mainly used as PE and polypropylene PP toughening agent.


1)Mainly used for toughening PP,PE ,PA in automobile industry manufacturing bumper, fender, steering wheel,
    pad and so on.
2)Insulation and sheathing with high requirements for heat and environmental resistance in wire and cable industry.
3)Also used for industrial products such as hose, conveyor belt, rubber cloth and molded products.
4)Medical appliances and household appliances, sporting goods, toys, etc., as well as packaging film, etc.
5. Cosmetics, food and other flexible packaging; Sports sole foam sole, out sole, etc;
6. Flame retardant master stock;
7. Stretch film, winding film, all kinds of plastic wrap;
8. Also used for industrial pressed products such as rubber hose, conveyor belt, tape and molded products.


POE 8450
Physical Properties Test Standard Value Unit
Desnity 23ºC ASTM D792 0.902 g/cm³
Melt Index 190ºC 2.16kg ASTM D1238 3 g/10min
Mooney Viscosity ML1+4 121ºC ASTM D1646 10 MU
Hardness Properties Test Standard Value Unit
Shore Hardness A 1s Compression Molded ASTM D2240 90  
Shore Hardness D 1s Compression Molded ASTM D2240 41  
Mechanical Properties Test Standard Value Unit
Tensile Strength Break 510 mm/min Compression Molded ASTM D638 22.4 MPa
Tensile Modulus Compression Molded ASTM D638 7.3 MPa
Elongation Break  510 mm/min Compression Molded ASTM D638 750 %
Tear ing Strength Die C ASTM D624 90.2 KN/m
Flexural Modulus ASTM D790 75.6-76.3 MPa
Thermal Properties Test Standard Value Unit
Vicat ASTM D1525 84 ºC
Melting Temperature DSC 10ºC/min 97 ºC
TG Internal methods -32 ºC
Crystallization Temperature DSC   80 ºC


Packaging & Shipping


25kg/bag, or per your requirement.18mt-20mt /20’FCL
The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air.
During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.


During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.


Company Profile

  ZheJiang Sashang Technology Co., Ltd. Specializes in exporting high quality Research chemical, Basic chemical and plastic raw material etc.Our products are produced on the basis of good technical team, advanced equipment, high qualified management which meet the requirements of security and environmental protection.
   Our main products are: HDPE,PVC,PP, POM, EVA, LDPE, PET, PC, GPPS and etc… We earned customer trust and created a good reputation during these years. We will provide the comprehensive products and service to you! Our products is exported to Southeast Asia, North America, Europe, Africa and other places all over the world with high quality products and competitive prices. We believe that our manufacturing capabilities and services can bring benefits to our valued customers. We believe that our products and services can bring benefits to our valued customers.
    We look CZPT to establishing a long-term cooperative relationship with you!



1. Are you trading company or Manufacturer ?

We are manufacturer.

2.What can you buy from us?

3.Can we get your samples?
Yes! Samples can be arranged for those available products. The Delivery Fee will be on buyer’s account.

4.Are you able to deliver on time?
Of course!we specialised in this line for many years,many customer make a deal with me because we can deliver the goods on time and keep the goods top quality!

5.What are your payment terms ?
We usually accept T/T,L/C for payment.

6.Do you accept customization?
Yes,the specification,packaging and logo can be customized.


Feature: Photodegradable
CAS No.: 9002-88-4
Formula: (C2h4)N
EINECS: 618-339-3
Material: Poe
Usage: General Plastics, Engineering Plastics, Specialty Plastics
US$ 1.1/kg
1 kg(Min.Order)

Request Sample



Customized Request

Injection molded partt

Designing Injection Molded Parts

Injection molded parts are a great way to produce fast, reliable parts without having to spend much time on post-processing. Whether you’re designing a small component or a large vehicle, you can expect your parts to be ready to use right away. Because of their high-speed production cycles, you can expect your parts to be delivered within 30 to 90 seconds.

Design considerations for injection molded parts

When developing a medical device, there are several design considerations to be made to create a quality injection molded part. Typically, product designers want to minimize the amount of material needed to fill the part while still maintaining the structural integrity of the product. To this end, injection molded parts often have ribs to stiffen the relatively thin walls. However, improper placement of ribs or projections can create molding problems.
Design considerations for injection molded parts include the overall shape and finish of the part. There are several ways to make the part look better. One way is to make the surface smoother and less pronounced. This will help the material flow evenly throughout the mold and minimize the risk of parting lines. Another way to reduce the risk of sink marks is to reduce the thickness of ribs relative to the nominal wall thickness of the part.
A common problem encountered when designing injection molded parts is sink marks. These can be difficult to avoid. A molder may not be willing to guarantee the product’s surface is sink-free, so designers must make sure that sink marks are minimized. To prevent these problems, the design of the parts should be as simple as possible.
Injection molded parts can also have complex geometries, and the design process is incredibly flexible. A good molder will be able to reproduce complex parts at low cost. To get the best possible results, designers should discuss the design and process with the molder. They should also discuss with the molder any critical tolerance specifications. The designer should also consider reworking the mold if necessary.
The wall thickness of a plastic injection molded part should be consistent. This is important because it influences the part’s functionality and performance. An uneven wall thickness can result in sink marks, voids, and other undesirable effects. It may also result in excessive plastic pressure or cause air traps.

Materials used in injection molded parts

When designing a product, materials used in injection molding are an important factor in the end result. These materials vary in strength, reusability, and cost. Understanding these differences is essential for ensuring the best product. In addition, understanding the characteristics of these materials can help you plan your budget and determine which ones are right for your application.
Choosing the wrong material can have serious consequences. In addition to premature component failure, the wrong choice can also increase your cost. To avoid such an occurrence, it’s a good idea to seek expert advice. Expert consultations can help you understand the factors that are important for your particular plastic molding project.
Fortron PPS: This thermoplastic resin offers excellent strength, toughness, and chemical resistance. It’s also stiff and durable, which makes it ideal for demanding industrial applications. Other common plastics include Nylon 6/6, which is strong and lightweight. Its high melting point makes it a great replacement for metal in certain environments. It also offers desirable chemical and electrical properties. PEEK is another common material used in injection molding.
ABS: Another engineering grade thermoplastic, ABS offers excellent heat resistance and chemical resistance. The disadvantage of ABS is its oil-based composition. As a result, ABS production creates noxious fumes. Nylon is another popular plastic for injection molding. Nylon is used in many different applications, from electrical applications to various kinds of apparel.
Injection moulding is a process where raw material is injected through a mold under high pressure. The mold then shapes the polymer into a desired shape. These moulds can have one or multiple cavities. This enables manufacturers to create different geometries of parts using a single mould. Most injection moulds are made from tool steel, but stainless steel and aluminium are also used for certain applications.

Characteristics of injection molded parts

Injection molded parttInjection molded parts exhibit a range of mechanical and physical properties. These properties affect the performance of the parts. For example, they can affect electrical conductivity. Also, the degree of filling in the parts can determine their mechanical properties. Some studies have even found that filling content can affect the dimensional accuracy of the parts.
To ensure the highest quality of the molded parts, it is important to inspect the machines and processes used to manufacture them. Proper maintenance can prevent mistakes and prolong the service life of the components. Moreover, it is essential to clean and lubricate the machine and its components. This will also reduce the possibility of mold errors.
The temperature and pressure characteristics of the injection mold can be characterized with the help of a simulation tool. For example, in a simulation environment, the injection pressure can be set as a profile and is equal to the pressure in the flow front. Moreover, the maximum injection pressure can be set as a value with minimum dependence on the flow rate. The temperature of the material used in the injection mold should be within a recommended range.
The temperature and pressure of the mold cavity must be monitored to ensure proper ejection. The temperature of the injection mold cavity is usually set at a temperature slightly above the ejection temperature. This can be manually or automatically. If the temperature is too high, the part will not be able to eject. The rapid temperature change can cause the part to warp. The same applies to the cooling time of the mold and cavity.
The thickness of the molded part should be uniform. If the injection mold does not conform to the required thickness, sink marks may be visible. A minimum of 2.5 mm between the outer and inner diameters is required for proper ejection.

Common problems encountered

There are several common problems encountered during the production of injection-molded parts. One of the most common of these is sink marks. These appear on the surface of the part and are a result of uneven cooling of the plastic within the mold. This problem can be caused by poor mold design, insufficient cooling time, and/or low injection pressure.
The first common problem occurs when the mold is not tightly clamped. This causes the molten plastic to be forced out of the mold. Other problems may occur due to the wrong clamping pressure or temperature. In these cases, the clamping force should be increased or the mold design should be revised to allow the plastic to flow properly through it. In addition, a poor quality mold may cause flash or burrs.
Another common problem is wavy patterning. These two defects can affect the appearance and functionality of the part. To avoid these problems, work with an experienced injection molding manufacturer who has experience in these types of parts. They will be able to troubleshoot and minimize any potential risks.
One of the most common problems encountered in injection molding is discoloration. A discolored part will be black or rust-colored. This problem is caused by an excess of air in the mold cavity, and can be avoided by reducing the injection speed. Ventilation systems can also be adjusted to minimize the chances of these problems.
Defective molds can cause a negative impact on the bottom line. By understanding the common problems encountered during injection molding, you can better avoid these problems and make your products as attractive as possible.

Fasteners used in injection molded parts

Injection molded parttInjection molded parts often use fasteners for securing fastener elements in place. As shown in FIGS. 7 and 8 (two separate views), the fastener elements are integrated with the molded product, and they extend from one side. The fastener elements are designed to engage loop elements in the overlying layer. The palm-tree shaped fasteners are especially well-suited for this purpose, as their three-dimensional sides engage more loops than flat sides. These features result in a more secure closure.
When fasteners are used in injection molded parts, the plastic is injected into a mold, with the fastener integrated. In addition to self-tapping screws, other plastic fasteners can include moulded or pre-drilled pilot holes. This method avoids the need for a secondary assembly step and ensures an easy fit. These screws also have other advantages, including a smaller thread profile and lower radial stress, which prevents boss damage.
Another type of fastener commonly used in injection molded parts is a boss. This type of fastener is typically larger than the nut and the pilot hole. An undersized boss can lead to warpage during the injection molding process and cause a product to fail in the field.
Another type of fastener used in injection molded parts is a thread insert, which is usually a stainless steel A2 wire. There are different versions of this fastener for different materials, including carbon fiber reinforced plastic. And the fastener can be modified to adjust the size of the hole.
These fasteners are used in many different types of injection molded parts. Some parts are used to fix a variety of cosmetic issues, such as minor sinks. While these are not defects, they may not look perfect, and they can affect the overall appearance of a product. If you want to improve the appearance of an injection molded part, you can add fibers and glass fibers, as well as colorants.
China Professional High Quality Grafted Poe White Granules for Increased Dispersibility   complex injection molded partsChina Professional High Quality Grafted Poe White Granules for Increased Dispersibility   complex injection molded parts
editor by CX 2023-10-20